Each router is equipped with various LED lights that indicate the status of the router. When Eero blinking white light the question comes to our mind why does this white light appear? This article aims to elucidate the meaning of the blinking white light and assess whether it demands your attention.
Table of Contents
The reason behind Eero blinking white:
When Eero blinking white it means the initial setup or in case Eero encounters difficulty connecting to the internet. Here are some other factors that come behind the Eero flashing white light.
Internet Connection
A flashing white light on your Eero likely signals an interruption in internet service or issues with your modem. When your internet service is weak your Eero wifi extender blinks white.
New Setup
During the setup of a new Eero device, you will observe a white blinking light as it connects to the internet. This is a standard procedure that does not demand immediate attention. The blinking will cease once a successful connection is established.
Hardware Issue
If there is a problem with the Eero device it will also show white light.
Firmware Update
Eero devices receive automatic firmware updates to boost their performance and enhance security. During the firmware update process, the Eero will display a blinking white light.
Solutions
If you encounter an Eero blinking white light issue, here are some troubleshooting methods to resolve the problem.
Internet Connection
The first step that you have to do is you have to check your internet connection. You have to check whether the modem or gateway is connected properly and performing properly. When you check this first then we can check other possible reasons that occur.
Then you have to check all the cables are connected properly. You have to check your ISP(Internet service provider). Verify whether other devices connected to the internet are experiencing the same problem.
Restart The Device
Restarting the device is one of the most common methods to resolve this issue. It is the most effective method and should be attempted first before exploring other solutions.
Disconnect the Eero device from the power source. Wait for around 1 to 3 minutes. Plug the device back into the power source and wait for it to undergo a reboot.
Restart your Eero Network
If rebooting the Eero did not resolve the issue, consider restarting the entire network. To restart the entire Eero network, follow the steps outlined below.
1) Begin by disconnecting the power cable from your modem.
2) In the next step you have to remove the Eero router from power.
3) Wait for 30 seconds to ensure the complete removal of power.
4) Again connect the power cable to your modem. Wait for the device to restart.
5) Then you have to connect the power cable to the Eero router.
6) Wait for the Eero to restart. Now you will see the steady white light on your router this means the device is connected to the internet and working smoothly.
Update Firmware
All Eero devices update their firmware to enhance performance. If the devices encounter any issues during the update process.
Open the Eero app and go to the settings and check if there is a new firmware version available. If the update is available then you have to install the new update. After that, you have to wait for the restart of the device. Hopefully, your issue will be resolved.
Conclusion
The presence of a blinking white light on your Eero device signifies its attempt to establish an internet connection, but an issue is being encountered. Such occurrences could be attributed to various factors, such as a firmware update, initial setup, or problems with the internet connection.
